Network & integration
captive portalYes
wi fi protocols2.4 GHz: IEEE 802.11 b/g/n/ax 5 GHz: IEEE 802.11 a/n/ac/ax
max client count64 (2.4 GHz) 256 (5 GHz) 256 (2.4 GHz and 5 GHz enabled)
key to security lock1
networking interface1 x 10/100/1000BASE-T port
client device isolationYes
pppoe client pppoe dial upYes
number of aps on a self organizing network300
unified networking for all network equipmentYes
recommended number of associated wireless clients● Support for IEEE 802.11ax and 160 MHz: 16 (2.4 GHz) 84 (5 GHz) 100 (2.4 GHz and 5 GHz enabled) ● Support for IEEE 802.11ax and 80 MHz: 16 (2.4 GHz) 84 (5 GHz) 100 (2.4 GHz and 5 GHz enabled) ● Support for IEEE 802.11ac: 16 (2.4 GHz) 64 (5 GHz) 80 (2.4 GHz and 5 GHz enabled)
Power & installation
weight≤ 0.4 kg (0.88 lbs) (without packaging materials) ≤ 0.6 kg (1.32 lbs) (with packaging materials)
dimensionsØ175mm x 39mm (Ø6.89 in. x 1.54 in.) (excluding the mounting bracket)
power methodPoE DC(12 V, 1.5A), DC Power Adapter Is Not Included
mounting typeCeiling Mount,Wall-mounted (Mounts Included)
mounting bracket1
power consumption≤ 12.95 W
local management through the web interfaceYes
Environment & compliance
emcVCCI-CISPR 32:2016, VCCI-32-1:2016
warranty3 Years
environmentOperating Temperature: 0°C to 40°C (32°F to 104°F) Storage Temperature: –40°C to +70°C (–40°F to +158°F) Operating Humidity: 5% RH to 95% RH (Non-condensing) Storage Humidity: 5% RH to 95% RH (Non-condensing)
certificationFCC, ISED, cTUVus, TEC, WPC，TELEC，VCCI
ndaa complainYes
warranty card1
wi fi standardsIEEE 802.11 a/b/g/n/ac/ax
functional only for india tec certificationIEEE 802.3 Annex-H（Only for India TEC Certification） RFC 2460 or RFC 8200, Annex-P7 （Only for India TEC Certification）
Other specifications
rfItem 19 of Article 2 Paragraph 1, MIC Notification 88, ANNEX 43. Notification No.88 of MIC, 2004, annex 45 Test Method for 5 GHz Band Wideband Low-power Data Communications System. (Item 19-3 of Article 2 Paragraph 1)
led1 x System Status LED
natYes
mimo2.4 GHz: 2 x 2 MU-MIMO 5 GHz: 2 x 2 MU-MIMO
pingYes
snmpYes
4k qamNo
button1 x Reset button
device1
802 11kYes
802 11rYes
802 11vYes
ap modeYes
data quotaNo
modulationOFDM: BPSK @ 6/9 Mbps, QPSK @ 12/18 Mbps, 16-QAM @ 24 Mbps, and 64-QAM @ 48/54 Mbps DSSS: DBPSK @ 1 Mbps, DQPSK @ 2 Mbps, and CCK @ 5.5/11 Mbps MIMO-OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, and 1024-QAM OFDMA
tracerouteYes
802 1q vlanYes
dhcp serverYes
router modeYes
user manual1
band steeringYes
coverage area125 ㎡ (1345.49 square ft.) Note: The data is obtained in an ideal environment without obstruction. The signal coverage radius depends on client performance and environmental interference.
rf beamformingYes
ai optimizationYes
layer 2 roamingYes
layer 3 roamingYes
mesh managementYes
wi fi schedulesYes
wireless meshingYes
alignment sticker1
channel bandwidth2.4 GHz: 20/40 MHz 5 GHz: 20/40/80 MHz
static ip addressYes
wreless data rate2.4 GHz: 573 Mbps 5 GHz: 1201 Mbps
bandwidth limitingYes
psk authenticationYes
weather resistanceIP Rating: IP41 Lightning Protection/Surge Protection: ±2 kV
max number of ssids8
operating frequency2400–2483.5 MHz: 5150–5250 MHz (indoor use only) 5250–5350 MHz (indoor use only) 5470–5730 MHz
receiver sensitivity11b: –91 dBm (1 Mbps), –88 dBm (5.5 Mbps), –85 dBm (11 Mbps) 11a/g: –89 dBm (6 Mbps), –80 dBm (24 Mbps), –76 dBm (36 Mbps), –71 dBm (54 Mbps) 11n: –83 dBm (MCS0), –65 dBm (MCS7), –83 dBm (MCS8), –65 dBm (MCS15) 11ac: 20 MHz: –83 dBm (MCS0), –57 dBm (MCS9) 11ac: 40 MHz: –79 dBm (MCS0), –57 dBm (MCS9) 11ac: 80 MHz: –76 dBm (MCS0), –51 dBm (MCS9) 11ax: 20 MHz: –85 dBm (MCS0), –58 dBm (MCS11) 11ax: 40 MHz: –82 dBm (MCS0), –54 dBm (MCS11) 11ax: 80 MHz: –79 dBm (MCS0), –52 dBm (MCS11)
wi fi multimedia wmmYes
wi fi speed limitingYes
802 1x authenticationYes
multi link operation mloNo
wpa tkip wpa2 aes and wpa pskYes
cross pan head screws st4 2 x 25 mm4
plastic expansion anchors 9 x 25 4 mm4
remote management through lysora cloudYes
owe enhanced open wpa3 sae wpa2 psk wpa3 saeYes
local or remote management through lysora appYes
unified configuration or monitoring through lysora cloudYes
